How to move the mouse cursor with the keyboard in Windows

Whether your mouse breaks, runs out of batteries, or if you want to have an alternative way to the cursor, you can use the arrow keys on the numeric keypad. Before proceeding, make sure the Num Lock feature is toggled on by pressing the key until you see an indicator light or can type numbers with the keypad.

• Shortcut key combo
• Windows 10
• Windows 8
• Windows 7, Vista, or XP
• How to use Mouse Keys

Shortcut in all versions of Windows

1. Press Left Alt+Left Shift+Num Lock on your keyboard at the same time to get a dialog box similar to the example shown below.

2. When the window appears, press Spacebar or Enter to say Yes.
3. Repeat this process to turn Mouse Keys off.

Windows 10

If the shortcut key combination listed above did not work, you may enable or disable Mouse Keys, using the following steps. If your mouse isn't working, use the Tab key and Spacebar to navigate through menus.

1. Press the Windows key on your keyboard.
2. In the box that appears, type Ease of Access mouse settings and press Enter.
3. In the Mouse Keys section, toggle the switch under Use numeric pad to move the mouse around the screen to On.
4. Press Alt+F4 to exit this menu.

Windows 8

If the shortcut key combination listed above did not work, you may enable or disable Mouse Keys, using the following steps. If your mouse isn't working, use the Tab key and Spacebar to navigate through menus.

1. With nothing selected, type the word "Mouse" anywhere on the Start Screen.
2. Arrow down to Ease of Access mouse settings and press Enter.
3. Toggle the switch under Mouse Keys to On.
4. Press Alt+F4 to exit this menu.

Windows XP, Vista and 7

If the shortcut key combination listed above did not work, you may enable or disable Mouse Keys using the following steps. If your mouse isn't working, use the Tab key and Spacebar to navigate through menus.

1. While viewing the Desktop, press the Windows Key or Click Start in the lower left-hand corner.
2. Select Control Panel from the list on the right-hand side.
3. Within the Control Panel, open Ease of Access.
4. Under Ease of Access Center, select Change how your mouse works.
5. Check the checkbox next to Turn on Mouse Keys.
6. Select Apply then OK.

Tip: If you want to change the cursor's movement speed or other settings, select Set up Mouse Keys.

How to use Mouse Keys

The following table shows each of the keys on the Numeric Keypad and how they interact with the mouse cursor. Make sure you're only using the Keypad to execute these actions.

Desired Action	Key Combination
Move up and to the left	Press 7
Move up	Press 8
Move up and to the right	Press 9
Move left	Press 4
Move right	Press 6
Move down and to the left	Press 1
Move down	Press 2
Move down and to the right	Press 3
Select the left mouse button	Press /
Select both of the mouse buttons	Press *
Select the right mouse button	Press -
Click	With the left button selected, press 5
Right-click	With the right button selected, press 5
Double-click	With the left button selected, press +
Drag an item	Point to the item, and then press 0
Drop the item you are dragging	Press.

Enjoy.....

Read More

How to turn your iPhone into a Wi-Fi hotspot

How to turn your iPhone into a Wi-Fi hotspot

There are many good things about turning your iPhone to a wireless hotspot. For example, you are traveling somewhere and you are carrying your laptop or tablet. You have two options, you can work offline on the tablet or laptop, or browse the internet on a very small screen. It would be great if you could use your 3G or 4G connection of the iPhone and go online on your laptop or tablet, right?

The good thing is that you can easily do this with your iPhone. It is quite easy to share your cellular connection with other devices you use. This feature is popular as tethering and it is really helpful -you don’t have to look for a café or a restaurant to use the internet or search for a free public hotspot.

Turning your iPhone to a wireless hotspot is quite easy. However, we recommend you to contact your carrier first and see if they allow this option or whether it is included in your monthly plan. This will exclude the chances of any unplanned extra fees. You also have to take care of your monthly bandwidth quota. In case you have limited bandwidth for the month, make sure to use this option only when you really need it.

Why should I create a Wi-Fi hotspot with my iPhone?

Let's say you're traveling with your iPhone and MacBook or a Wi-Fi-only iPad and want to do some work. At this point you've got two options: do the work on the larger-screen devices, but without being able to connect to any online resources; or go online but be stuck with a smaller screen.

Turning your iPhone into a Wi-Fi hotspot gives you a handy third option, allowing the laptop and tablet to piggyback on the phone's web connection. Wi-Fi hotspots are great for working on the go.

It's easy to turn your iPhone into a hotspot, but you may wish to speak to your phone carrier first or at least check your contract's terms and conditions; some networks prefer you not to do this and may charge you extra (or cap your data allowance) if they spot you set up a hotspot.


And while we're talking about data allowances, this is another thing to bear in mind: if you have a limited allowance you should only use the Wi-Fi hotspot for a short amount of time.

How to create an iPhone hotspot

Tethering basically transforms your iPhone into a wireless router just like the ones we all have at our homes. Of course, you won’t be able to login to the new router using its default IP (for example 192.168.1.1 and password) and tweak its settings, but it practically does the same job. Then the iPhone sends a wireless signals which enables us to connect our devices to the internet. The laptop or tablet can connect to the iPhone either by USB, or Bluetooth or wireless. It is quite good to know that your beloved iPhone can do this. So, if you want to turn your iPhone to a wireless hotspot follow these steps:

1. Tap the Settings icon
2. Then tap on Cellular and turn on Cellular Data. Make sure to set it to 3G or 4G in the Cellular Data Options.
3. Go back and tap Personal Hotspot and turn it ON..
4. Tap on Wi-Fi Password and enter a password you would like to use to connect your devices. At the same time, this will prevent others from connecting to your wireless hotspot.
5. On the laptop click on the Network icon and from the available networks select the one labeled as “iPhone” or similar.
6. Click on that network name and enter the password you have set up earlier.

Now you will be able to browse the Internet on any device you connect to your personal wireless hotspot. However, don’t forget you are using the data connection from your iPhone. Maybe you won’t get so good performance as with the Internet connection you have at home, but we are sure you will be able to do all the tasks you want to do.

Here's how to set up an iPhone Wi-Fi hotspot:

• Open the Settings app, then select Mobile Data. (In iOS 10 or later. In some older versions of iOS you just select Mobile.)
• Tap Personal Hotspot, and set Personal Hotspot to On. (Tap the slide so it turns green.)
• If Wi-Fi and/or Bluetooth are off, iOS will ask if you want to turn them back on. We'd recommend doing so - without them, the hotspot will be limited to USB. This is more secure, however.
• Tap 'Wi-Fi Password' and enter a suitable password. (This isn't related to your Apple ID or usual Wi-Fi connection.)
• Now check the name of the hotspot listed under To Connect Using Wi-Fi (we get "David's iPhone").
• Click the Wi-Fi icon in your Mac's Menu bar, or open the Settings app and tap Wi-Fi on an iPad, and choose the Wi-Fi hotspot.
• Enter the password from Step 4.
• That should be it. You should now be able to browse the internet on your MacBook or Wi-Fi-only iPad using the connection provided by your iPhone.

Don’t forget to turn OFF the hotspot when you don’t use it since it will drain your iPhone battery very quickly.

What are the dangers of creating an iPhone hotspot

There is always a possibility that someone will try to connect to your iPhone hotspot and use your bandwidth without your knowledge. If you have set up a password as we have mentioned before you shouldn’t worry about this. However, if someone guesses your password you will be notified when he or she gets connected to the wireless hotspot. If this happens you will be notified so you can react in time.

Another thing you have to take good care of is bandwidth. It is quite easy to forget paying attention to it while you are surfing. However, you can always use third-party apps to control the bandwidth. At the same time avoid downloading large files or updating your computer. This can consume large amounts of data and very soon you will hit the limit. So, always make sure to pay attention to this. Plus, when you use your iPhone as a hotspot you will notice the battery gets drained faster than usual.

Dangers & warnings

What if someone tries to hijack your connection, burning through your data connection and/or accessing dodgy sites and content?

You should be okay because the iPhone hotspot is password-protected. (All the more reason not to choose the word "password" or something else that's easily guessed.) And you'll see a small notification at the top of your iPhone's screen when a device accesses its hotspot, so you'll get a warning if someone in your train carriage does manage to guess your password.


A more important warning concerns data limits on your own surfing. It's easy to forget when accessing the web over a device that's normally limited to Wi-Fi connections, that you're working against a 3G or 4G data limit. Remember that you're on the clock, so to speak, and we'd suggest avoiding downloading large apps and similar.

Read More

The Top 7 Proxy Services For Gaming

Previously we have published an article on "Access Blocked Sites In Schools And College". Here in this article we will see some proxy sites to unblock, blocked gaming sites, Not only gaming sites but others too. Many companies block famous game sites from their internet to keep employers off of them. This is also true for schools and various other organizations. There is a way to get past these blocks by using a proxy and being able to access the games. Here are the top proxy sites that are ad-free.

Free Gate:

One of the best things about this service is that it can be used in both the English and Chinese languages. Since China is notorious for blocking sites, those who are international and want to unlock websites can use this one. It is the most popular site around because it works and works well. However, most employers know about this one, so if they block it, you won’t be able to use it. User reviews are high for this service.

Ultra Surf:

This one does require a download but doesn’t require any installation to run. Supports both English and Chinese, it is a great choice for getting through gaming sites. When there is heavy Internet censorship, this is the one to use. It has a great rating and it is one that is not as recognizable as Free Gate so it has a chance of being open rather than blocked. Surf the web without one trace of your IP address.

GTunnel:

Those who frequent Skype or GTalk will find accessing this site simple, as you can do it through these services. If you want to protect your anonymity online, this is the site to use. Because of its easy to use the platform, it has a high rating among users.

Tor:

Tor supports many different languages, not just common English and Chinese. It has been around for some time and is one of the proxies that support instant messaging clients and also those who need to log in remotely. Protect your browsing habits and access sites you never thought possible.

Gapp Proxy:

Based on Google App Engine, Gapp Proxy is one of the newer proxies. This service had its last update in 2010, so it is not as up to date as some of the sites. Users will need to create a GAE application to access this service. Though it is one of the top 10 free proxies, it is a little bit difficult to get going. However, once that is done, it is smooth sailing.

Hyk-proxy:

The last update was the final one to this service, but it still will get you past all those blocked sites. To use this service you must create a Google App Engine application. You will need JAVA to be able to access this proxy and set up can be a bit of a pain. Though it may not be popular enough to do any future updates, it still works great the way it is.

Your Freedom:

Saving the best for last, this rudimentary service will not cost a dime. Those who are worried about SPAM and about pop-ups will not have to worry about this service. It is by far one of the superior services that allow access to any site. They are constantly updating, so their new platforms allow users to enjoy getting through even the toughest security set-ups.

Where there’s a will there’s away. If you want to get into a game page bad enough you can by using a proxy server. Some are difficult to set up but others will allow instant access with a simple download. The trick is to find one that is not blocked by the employer or country.

Read More

How To Boot Ubuntu From A USB Flash Drive

 How To Boot Ubuntu From A USB Flash Drive

Below are the three methods, that can be adopted to boot Ubuntu OS from a USB Flash Drive!

Option 1: Boot Ubuntu as a Live CD from a USB Flash Drive

Use this option to install Ubuntu as a Live Install, which allows you to boot from the USB flash drive in Ubuntu, experience the Linux environment but will not retain any changes or settings after you shut down. This is a great way to get a feel for the OS, test some of it's capabilities as well as typical hardware compatibility.

Programs you may need to download:

1. Ubuntu 10.04 Live CD ISO is available at ubuntu.com.
2. Universal USB Installer available at pendrivelinux.com.

What you will need:

1. Computer Running Windows XP/Vista/7.
2. Fat32 Formatted USB 2.0 Flash Drive, at least 1GB.
3. PC with a Bios that can boot from USB.

Now with all of the necessary components in place, we can begin to set up our Ubuntu Live USB Drive,

1. Run the Universal USB Installer by Pendrivelinux.com that you downloaded earlier.
2. Choose Ubuntu 9.10/10.04.1 Desktop i386.
3. Select the Ubuntu Live CD that you downloaded earlier.
4. Choose your Flash Drive.
5. In this instance, we are going to leave the persistence option unchecked.

This can take anywhere from 15 minutes to 30 minutes depending on the speed of your system. At one point the progress bar will freeze until it is done, and this is the lengthiest wait of the process.

Once complete, you can reboot your computer with the USB flash drive in the USB port, press F12 for the Boot Menu and choose the removable media to boot from and you are in.

As this is a Live USB, any changes you make to the Ubuntu environment will not persist through a reboot. This is because running in this mode, Ubuntu uses available RAM in place of Swap and Hard Disk space. This option also contains the install files needed to install Ubuntu directly to your desktop if you should so desire.


Option 2: Boot Ubuntu as a Live CD with Persistence from a USB Flash Drive

This option will install Ubuntu Linux onto your flash drive with an area for persistent storage. You will be able to restart the computer, boot back into the Linux environment and all settings or changes made previously will persist.

Note: This option is particularly hard on Flash Memory, as there can be quite a bit of reading and writing to the Flash Memory.

What you will need:

1. Computer Running Windows XP/Vista/7.
2. Fat32 Formatted USB 2.0 Flash Drive, at least 2GB.
3. PC with a Bios that can boot from USB.

Now with all of the necessary components in place, we can begin to set up our Ubuntu Live USB Drive,

1. Run the Universal USB Installer by Pendrivelinux.com that you downloaded earlier.
2. Choose Ubuntu 9.10/10.04.1 Desktop i386.
3. Select the Ubuntu Live CD that you downloaded earlier.
4. Choose your Flash Drive.
5. Select the Persistence Option of 1GB Casper-RW.

This can take anywhere from 15 minutes to 30 minutes depending on the speed of your system. At one point the progress bar will freeze until it is done, and this is the lengthiest wait of the process.

Once complete, you can reboot your computer with the USB flash drive in the USB port, press F12 for the Boot Menu and choose the removable media to boot from and you are in.

As this is a Live USB with Persistence, any changes you make to the Ubuntu environment will keep through a reboot. This option also contains the install files needed to install Ubuntu directly to your desktop if you should so desire.


Option 3: Install Ubuntu directly to a USB flash drive

This option works by installing Ubuntu to the flash drive like a complete installation. It does not retain the installation files to install on another system. This will allow you to use Ubuntu exactly as if it were installed alone on the hard disk. You can boot from it with any computer that can boot from a USB flash drive.

Note: This method requires that you disable your hard drive in BIOS to prevent overwriting your current operating system and force the install onto the USB drive.

What you will need:

1. USB 2.0 Flash Drive, at least 4GB.
2. PC with a BIOS that can boot from USB.
3. Blank CD.
4. A Computer with the ability to Burn CD/DVD.

Now with all of the necessary components in place, we can begin the process,

1. First, you will need to burn your Ubuntu ISO to CD using a program like ImgBurn available at ImgBurn.com.
2. Boot your computer and press F2 to enter the system BIOS. Within here you will want to disable your Hard Drive. If this is not an option in your BIOS, I would suggest shutting down your computer and unplugging the power and data cables from your hard drive before proceeding. Note: If you choose not to disable your hard drive, you run the risk of installing Ubuntu on top of your current OS and can lose valuable information.
3. After you have disabled your hard drive, place the Ubuntu Live CD into your computer and boot from this.
4. At the initial boot screen, choose to try Ubuntu, not install.
5. Once Ubuntu loads, plug in the desired flash drive into the computer.
6. Now, double click on the Install Ubuntu icon that appears on the desktop.
7. The first 3 screens are language, time zone, and keyboard layout.
8. Now Ubuntu will notify you that there is a disk mounted, and asks to unmount it. This is your flash drive. Give it permission to unmount.
9. This is the prepare disk space screen. I chose to leave mine at default and let the installer handle the partitions needed by Linux.
10. Now you will see the login and user information screen.
11. Now you are ready to install, click install.
12. At one point during the installation, you may notice a skip button appear on the bottom left. This is to skip the auto-update, and finally the language packs. I chose to skip the language packs update.
13. This may take a while, mine took about 35 minutes to complete. When it is done, eject the disk and shut down the computer. Plug your hard drive back in if necessary, or boot your computer into bios and re-enable it. Reboot your computer and press F12 to enter the boot menu, choose the flash drive and boot into Ubuntu.

Read More

Forget Your Windows 7 Password? Create Windows 7 Password Reset Disk

Suppose if you forgot Windows 7 password, you would try to find solutions to recover or reset it through the internet. Soon you would find one solution—using Windows 7 password reset USB disk, which is most mentioned by people. So here in this article, I will show you the exact ways to create a Windows 7 password reset disk.

Theoretically, a password reset disk Windows 7 can be made with a CD/DVD or USB flash drive. Since USB flash drive is more convenient to carry and safer to preserve, here I highly recommend creating a Windows 7 reset password with USB to prevent your computer from being locked. Below are guides on how to create a Win 7 password recovery USB.

Situation 1 :)

If you haven’t forgotten your Windows 7 password yet. In this situation, you can easily make such a password reset USB disc for free to prevent your computer from being locked.

Now follow the below steps:

1. Insert the prepared USB flash drive into your computer.
2. Type “reset” in the Windows search box and select “Create a password reset disk”. 
3. When the “Forgotten Password Wizard” appears, click “Next”.
4. Select your USB flash drive and click “Next”.
5. Once the wizard finishes creating the reset disk, click “Next” then “Finish”.
6. That's it. Job Done!

Situation 2 :(

If you have already forgotten your Windows 7 password. Many computer users actually didn’t take any precautions against Windows 7 password forgotten problem before they find they’ve lost or forgotten the password. So if you don’t have such a password reset disk when you forget or lose your Windows 7 password, you need to seek other ways to make one and then use that to reset Windows 7 password.

Here’s how to create a reset password Windows 7 USB with Windows Password Recovery Enhance:

You need to do the below steps in another system to recover your system.

1. Download and install PC Login Now's an iso file.
2. Burn the ISO file to CD (Use Magic ISO).
3. After you have created a bootable disk, Insert that disk into the DVD Drive and Restart your computer.
4. Set the BIOS to boot from CD. (Mostly not required if your system automatically detects the disk on your DVD Drive).
5. The software then automatically runs.
6. Use PCLoginNow to finish the job.

Note:

Download-file is an ISO file named “PCLoginNow_Free.ISO” which should be burned to a CD before using it.

Read More

How To Make A Folder Invisible

Using this trick You can do two things,

1. Creating A Folder Without Name.
2. Making An Invisible Folder.

The Later is derived from the former one.

Creating a folder without a name:

Using this trick You can do two things,

1. Creating A Folder Without Name.
2. Making An Invisible Folder.

The Later is derived from the former one.

Creating a folder without a name:

Creating an invisible folder is very simple. Just do the above things and create a folder without name. Then follow the below steps.

• Right-click the folder and go to Properties.
• Select the Customize Tab.
• In the Folder icons section, click the Change Icon button.
• Move the navbar, you can find empty spaces in between various icons. Select any one empty space among them and press Ok.
• Now, you will see nothing unless you click that place, where your folder was previously present.

If you have any problem with doing this just leave a comment. I will help you.

This instructable will teach you how to make an invisible folder. You can hide lots of things in it and nobody, but you!

NOTE: This instructable works for Windows 7, Vista, and XP. I'm not sure if this works for Windows 2000 and earlier (someone please help me on this.)

Step 1: Getting the Folder

1. right-click on your desktop
2. go to "new"
3. click "folder"

a new folder should pop up...

Step 2: Making It Invisible!!!

1. right-click on the folder
2. click on "properties"
3. click on "customize"
4. click on "change icon"
5. click on a blank space

it should be invisible...

Step 3: Finishing It Up (Optional)

NOTE: this is optional

making the words invisible:

1. go to properties
2. go to the rename box
3. hold ALT and press "0160" in the box (use a number pad)

Now you can hide all the stuff you want to in it!

Step 4: If You Have Vista

I just got vista not too long ago. I also found this annoying bug in vista. My invisible folders won't delete!

Here's what you do:

1. hold "shift" and "right-click" the desktop
2. click "open command window here"
the command prompt should open
3. type in:
ren "(hold alt and press 0160)" temp
4. move the folder into the recycle bin

Read More

New Shutdown Trick With Countdown

New Shutdown Trick With Countdown

• Open RUN by pressing window+ r
• Then type there “shutdown -s -t 3600" without quotes and press ENTER. 
• Now you’ll see a box telling you that “your system is shutting down”. 
• You cannot stop this count down by task manager and by any other method. within one minute your system will restart. 

If you want not shut your pc then follow the below steps:

1. Immediately got to run and type “shutdown -a” or “shutdown /a” without quotes and press enter. 
2. This will stop the count down.
3. You may vary the time. here 3600 is for 1 minute. you may set the time to 1 second also but you cannot stop this within 1 second so increase it!

TRICK 2

Many a time people like to sleep on music, but the problem is that the comp will continue running the whole night. Here is how you can create a countdown timer to shutdown your comp in your specified time.

Go running in the start menu and input this command
    

shutdown -s -t 3600

this will create a countdown timer that will go off in 3600 seconds (1 Hour). you can replace the 3600 to any time limit you want the comp to shut down, but remember the time should always be expressed in seconds i.e if u want the comp to shutdown in Half an hour you have to write 1800 and so on...

If you are as lazy as me and don't want to input the command each time, then create a batch file or shortcut

Batch:
open a notepad and type

shutdown -s -t 3600

now in the files menu select "save as" and save this file as Activate.bat

Just double-clicking this file will activate your timer

Shortcut:
On the desktop right-click and create a new shortcut. in the location type

shutdown -s -t 3600

Give it any name like "Activate timer"
Again, double-clicking this newly created shortcut will do the same.

FORCING THE SHUTDOWN:

another operator that you can use with this command is -f. this will force a shutdown on the system. suppose you want the comp to shut down as quickly as possible you can give a command

shutdown -s -f -t 00

here we have used a -f operator and the delay is set to 0 seconds.

(as we are talking about the quick shutdown, u can use the command
c:windowssystem32tsshutdn.exe 00 /POWERDOWN /DELAY:00 also)

STOPPING THE TIMER:
Any time when you want to stop the running timer use a -an operator(standing for abort)

the command is

shutdown -a 

You can use it in any way u prefer, like direct input in the run (or command prompt), create a .bat file or create a shortcut on the desktop

SOME OTHER OPTIONS:

shutdown -r (restarting)
shutdown -r -t 3600 (timer for restarting in 1 hour)
shutdown -r -f -t 00 (quick reboot)

Don't forget to Share or Comment if you like this trick!

Read More

How To Block Certain Websites In Chrome Using Simple Method

Let’s have a look at the method that will help you to block any of the websites in your Google Chrome browser by using one simple setting that will work as a website blocker, So follow the complete guide discussed below to proceed.

Google Chrome could be named as the king browser as it is one of the most popular and feature-rich web browsers. Managing various aspects related to surfing the websites, storing data, downloads, etc are extremely easy to be done on Chrome. The best capability of the Chrome web browser is that the users of this browser can amend the network behaviors to justify their search reflections. The users can filter the many aspects related to searches, block certain websites from opening and appear anywhere. Blocking any website in Chrome could be great fun and a good benefit for some users. Actually, it is all not straightforward to block any websites through the chrome but a kind of method is required to be applied. For the users keen to know about the procedure to block websites on the Chrome browser we have written this article. We have described the whole procedure of blocking the websites and their complete methods. If you are also willing to know about this method then please read the full article below!

How To Block Certain Websites In Chrome Using Simple Method

The method is simple and straight and you just need to use one manual setting in your browser and then enter the website that you want to block and that’s it you are done with it. So the guide is explained step by step below.

Steps To Block a Website in Chrome:

#1 Blocking a website is really easy through the Chrome browser and eventually there are numerous ways out inside this browser to block any website. One super-easy way to do so is to use an extension for this functioning. There are plenty of website blocking extensions available for the Chrome browser! Another way is to manually block the website through Chrome settings and preferences. The manual method is better and it actually provides full security about its working!

#2 So let’s take on this method to block websites manually on Google Chrome. First of all, go to the Menu of the chrome browser using the Three dots button. Inside the menu select Settings option and then Advanced Settings.

#3 On the Advanced Settings panel check in to the Change Proxy Settings which will be there under the Network option. This will pop up another screen named Windows Internet Properties window.

#4 Select the Privacy panel on this screen and then select the Sites button placed under it. Through there now you can easily add the URL of any site that you wish to block. Simply fill the URL for the site and then close the panel. Just restart the Chrome Browser to take effect for the above settings.

#5 Repeat the above step to add as many sites as you wish to the blocklist and the chrome will over your orders. You will never see those blocked sites appearing inside the chrome.

#6 To revert the process and unblock the sites simply check into the same screen through the above steps from where you added the websites for blocking. And after that view, the blocked sites from the options, edit the restrictions over the sites easily then.

So the above guide was all about How To Block a Website in Chrome. As through the below article your have eventually got to know that how easy it is to block the websites on the Chrome browser. We hope that you liked this article, if you liked it then please try to take some time and share your valuable opinions regarding it. To share the opinions you can log on to the comments section below! And let us know the issue that you faced as a technical team will be always there to assist you in any of your issues.

Read More

How to Use Gestures to Control VLC Playback

Learn how to Use Gestures to Control VLC Playback by which you can easily control your playback using one simple trick. So have a look at the complete guide discussed below to proceed.

The VLC media player is the best known third party media player app that is available for almost every major operating system either on the smartphones or on the computer devices. The reason why this pack of the media player has gained such a huge audience is that it provided all the best features and the related functions all for free. The users never need to install any other app to fulfill their requirements. The best thing about the VLC is that it can be used to control the media playback aspects through simple but quick gestures. Most of the new users and sometimes the average users of VLC does are not introduced with the number of gestures that actually persist on the VLC. Knowing almost every single gesture feature of the VLC we have decided to reveal these all to the beginners so that they can utilize this potential tool with abundant power. So here we are to start up listing about all the gestures of VLC media player, just keep on reading the post till the end and you will definitely know so many useful gestures!

How to Use Gestures to Control VLC Playback

The method is quite simple and easy and you just need to follow the below guide to proceed.

Swipe Up on the Left Side of the Screen:

If you are using the VLC media player and playing any sort of video or movies then you would experience sometimes required to increase or decrease the brightness of the screen so that the Xperience cannot be bricked. Think about changing the brightness of the screen and you will have to go through various options. But now inside the VLC, you can simply do that without even leaving the video playback. The swipe up gesture if done on the left side of the screen can increase the brightness of your display.

Swipe Down the Left

Again using the swipe but now on the downflow at the left side of the screen can change the brightness of the display to the lesser shine. This is also done inside the VLC only and you will not require leaving the video playback for the function.

Swipe down on the Right

Inside the VLC while playing the videos you can also decrease the sound of the video by swiping down the screen at the right side of the display. Alike to the above software you need to do nothing but remain on watching the video as the option will not interrupt the video playback.

Swipe Above on the Right side

Simple it is to increase the sound of the videos inside the VLC. Just swipe above the screen and you will be able to see your video with the hiked sound!


Finally, you have now gained so much about the gestures of the VLC that you can now easily master the quick flow usage of this amazing media player. By this, you will also be saving lots of stuttering time between the playback that you would either have made for making any simple changes only. We hope that you all would have grasped the fullest amount of information regarding the usage and the working of all the various different gestures on the VLC media player. Please try to share this article with others so that they can also gain this essential working knowledge about the VLC controlling. Make sure that you also comment below about the information in this article so that we can identify how it helped you and what all was lacking etc.

Read More